Optical Amplifiers Modules.
Features:
– Saturated output power up to 22 dBm
– Wavelength range 1528 to 1563 nm
– Large input power range
– Low noise figure
– Gain flattened version available
– Easy control
– Gain flattened version and pre-amplifier version available.
Software features:
– Manual or Automatic control
– Output and Gain control
– Scale modes: mW or dBm
– Easy parameter access
– Other modules measurement display
The AP3370 Erbium-Doped Fiber Amplifier (EDFA) modules are designed to meet the need for C-Band testing of active and passive components. These amplifiers provide high power, high reliability, and superior optical performance. This EDFA module is ideal for today’s highly dynamic networks and cost sensitive market. Along with a portable design, AP3370 EDFA modules provide stable saturated output power up to 22 dBm and noise figure of less than 5 dB. A gain-flattened version and a pre-amplifier version for a lower input power (-30 dBm), are also available.
The AP3370 EDFA module could be combined with AP3314 power meter modules in the platform. Thanks to the amplification settings, the power meters permit an active power control to keep output power constant.
The display menu of the AP3370 EDFA module allows an overview of any other AP1000 modules. The operational parameters are easily accessed using mnemonic symbols, and simple prompts provide user-friendly operations.
Specifications:
AP3370A Booster Amplifier modules
|
Min. |
Typical |
Max. |
|
|
Output Powera (dBm) |
From +13 dBm to +22 dBm according to the model |
||
|
Input Power Rangeb (dBm) |
-10 |
0 |
+4 |
|
Operating Wavelength range (nm) |
1528 to 1563 nm |
||
|
Noise Figurec (dB) |
4.5 |
5.0 |
|
|
Polarization Dependent Loss (dB) |
≤ 0.3 |
||
|
Polarization Dependent gain (dB) |
≤ 0.3 |
||
|
Polarization Mode Dispersion (ps) |
≤ 0.3 |
||
|
Pump Power leakage (dB) |
-30 Max. |
||
|
Output & input isolation |
≥ 30 |
||
|
Return loss (dB) |
≥ 40 |
||
|
Fiber type |
SMF-28, 900 µm loose tube |
||
|
Operating temperature (°C) |
0 to 65 °C |
||
AP3370B Line Amplifier modules
|
Min. |
Typical |
Max. |
|
|
Output Powera (dBm) |
From +13 dBm to +22 dBm according to the model |
||
|
Input Power Rangeb (dBm) |
-20 |
-10 |
0 |
|
Operating Wavelength range (nm) |
1528 to 1563 nm |
||
|
Noise Figurec (dB) |
5.0 |
6.0 |
|
|
Polarization Dependent Loss (dB) |
≤ 0.3 |
||
|
Polarization Dependent gain (dB) |
≤ 0.5 |
||
|
Polarization Mode Dispersion (ps) |
≤ 0.5 |
||
|
Pump Power leakage (dB) |
-30 Max. |
||
|
Output & input isolation |
≥ 30 |
||
|
Return loss (dB) |
≥ 40 |
||
|
Fiber type |
SMF-28, 900 µm loose tube |
||
|
Operating temperature (°C) |
0 to 65 °C |
||
AP3370C Pre-Amplifier modules
|
Min. |
Typical |
Max. |
|
|
Signal gaind (dB) |
From 20 dB to 40 dB according to the model |
||
|
Input Power Rangeb (dBm) |
-30 |
||
|
Operating Wavelength range (nm) |
1528 to 1563 nm |
||
|
Noise Figurec (dB) |
5.0 |
5.5 |
|
|
Polarization Dependent Loss (dB) |
≤ 0.3 |
||
|
Polarization Dependent gain (dB) |
≤ 0.5 |
||
|
Polarization Mode Dispersion (ps) |
≤ 0.5 |
||
|
Pump Power leakage (dB) |
-30 Max. |
||
|
Output & input isolation |
≥ 30 |
||
|
Return loss (dB) |
≥ 40 |
||
|
Fiber type |
SMF-28, 900 µm loose tube |
||
|
Operating temperature (°C) |
0 to 65 °C |
||
a) Pin = 0 dBm
b) The range of optical input power can be specified.
c) Pin = -6 dBm
d) Pin = -30dBm
Tunable Laser Source | Optical DFB Lasers| Optical Power Meters | Optical Variable Attenuators | Optical Tunable Filters | Optical Switches